Jewelry Care


18k Gold

To prevent damage to your white, yellow or rose gold jewellery, we recommend you store it safely away from other pieces to avoid unnecessary scratches. Gold should be kept away from harsh chemicals, such as cleaning and beauty products, to avoid discolouration to the metal.
All our 18k white gold has been plated with a white rhodium finish, this is a layer of plating applied to the metal to emphasize the bright white finish of the metal and can be especially susceptible to discolouration when brought into contact with chemicals. Should this occur, you can bring these into a Stephen Webster boutique where we can offer you a rhodium plating service to bring back that white shine.

Platinum

Platinum has the advantage of being a harder and a more durable than most wearable metals, however, it needs caring for in a similar way to your gold pieces. It is still prone to scratching so should be suitably stored to prevent it from rubbing against other pieces you may have. Again we would recommend you keep this away from any strong chemicals to avoid damaging or weakening the metal.

 

CARING FOR YOUR PRECIOUS STONES

Diamonds

Diamonds are well known for their hardness on the Mohs scale, however they can still be chipped or cracked when knocked and care should be taken to avoid harsh contact when worn. Diamonds can be easily cleaned using a small amount of liquid soap in hot water and dried using a lint-free cloth to remove any dirt and grease to bring back its shine.


Emeralds

Emeralds are infamous for their history and the deep luscious green colour is one that cannot be matched by another stone. They are even more precious due to the care that needs.

Emerald is 7.5 to 8 on the Mohs scale and has fair to good toughness, making it a stone that requires more care in wearing than ruby or sapphire. Even so, emeralds are beautiful stones for all types of jewelry and with proper care will last for generations.


Heat can damage emeralds, especially by extending existing fractures. Light and chemicals can cause the oils, resins, and polymers used to fill surface-reaching fractures to alter in appearance or deteriorate.


Some estimates state that 90 percent or more of emeralds are fracture-filled. Since the great majority of fashioned natural emeralds contain filled fractures, it’s risky to clean them ultrasonically or with steam. Ultrasonic vibrations can weaken already-fractured stones, and hot steam can cause oil or unhardened resin to sweat out of fractures. Using warm, soapy water coupled with gentle scrubbing is the safest way to clean emeralds. 

 

Sapphires & Rubies

Corundum (ruby and sapphire) is relatively hard—9 on the Mohs scale. It has excellent toughness and no cleavage, which is a tendency to break when struck. This makes it a great choice for rings and other mountings subject to daily wear. 

 

Warm, soapy water is always safe. Ultrasonic and steam cleaners are usually safe for untreated, heat-treated, and lattice diffusion treated stones. Fracture-filled, cavity-filled, or dyed material should only be cleaned with a damp cloth.

 

Other Gems 

 

Porous gemstones, including amber, turquoise, opals and pearls can be stained by oils or liquids, so it’s important to avoid contact with face creams, lotions and household chemicals. Wash porous gemstones in lukewarm water and polish with a lint-free soft cloth.

 

SAVOLINNA FINE JEWELRY 2019